Washington DC AC Repair Tip: What to Do About Cool Spots

//Washington DC AC Repair Tip: What to Do About Cool Spots

Washington DC AC Repair Tip: What to Do About Cool Spots

Sitting on your couch watching TV should be an enjoyable experience, especially after a long day at the office. But, if your Washington DC air conditioner deposits an abnormally high volume of cold air directly onto your couch, making you shiver despite the 90 degree heat outside, you may have a cool spot.

Cool spots are an unfortunate side effect of modern air conditioning technology. They occur when HVAC systems are improperly sized or ductwork is improperly installed. Other factors like insulation, vent configuration or window placement can also contribute to the presence of a cool spot (and possibly some hot spots). So, what can you do about it? There are a few options, starting with a quick inspection of the space.

Checking for Common Problems

Your inspector will check a number of things. Most importantly, they’ll measure the size of your HVAC system and compare it to the dimensions and particulars of your house. Usually, in the case of cool spots, the problem is directly related to an oversized system. When it turns on, even for a few minutes, it produces more cold air than is necessary, flooding your home with cooling. The thermostat recognizes this and the system shuts off soon after turning on. As a result, you’ll feel fluctuation between cold and warm as the system fails to properly condition the space.

Modern systems are sized for your house at 100% capacity. So, when the system turns on, it should stay on for a substantial period of time, keeping your home cool. Turning off and on frequently is bad for the system and wastes energy (plus it produces those pesky cool spots). Keep in mind that hot spots can also occur if the system isn’t powerful enough.

Your inspector will also look for vent placement and duct configuration. Improper placement of vents can lead to pooling of cool air that creates cool spots. By checking for potential problems in the layout of your HVAC system, an inspector can determine if new vents or ducts are needed to solve the problem.

Fixing the Cool Spots

For now, you may just want to move to another part of the house. Cool spots rarely affect the entire space – they tend to cluster around vents and outlets and can usually be fixed by resizing or adjusting your system. However, only your Washington DC AC contractor can tell you for sure what the best solution will be for your air conditioning issues so make sure to schedule an inspection with Service Doctors today!

2016-05-13T01:04:41+00:00

About the Author: